Next, unscrew both limb bolts one revolution (360°) and check the poundage on a bow scale. Tighten the limb bolts until the limbs are tight to the riser.įirst, raise the drawing weight to its max. The bow will now be at the maximum poundage and maximum draw weight, ATA measurement, and brace height measurement can be verified. To check to see if a bow is in “spec” (at its specified manufacturer’s measurements) tighten (clockwise) the limb bolts until the limbs are against the riser. If the limb bolts are unscrewed too much, the limb bolt’s threads can come out of the riser and cause damage to the bow and injure the mechanic.Įvery bow’s limbs have a specific draw weight rating: 50-60, 60-70, 70-80, etc. Safety Precaution: Be careful that you do not unscrew the limb bolts passed the bow’s lowest weight setting. To lower the draw weight we unscrew the limb bolts equally on each limb (counterclockwise).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |